The Hp 3764A digital transmission analyzer is available in a number of different versions to cover a wide range of telecom and general purpose test applications. Each one offers pattern generation and error detection at coded and binary interfaces, and a HP-IB port for remote control operation.
A version of the HP 3764A with combined error and Option 002 jitter performance measurements at 140 Mbit/s is ideal for production test of mode to allow jitter to be
added to any 140Mbit/s signal passing through the instrument.
Versions of the instrument with CEPT rates from 704 kbit/s to 140 Mbit/s offer a test solution for manufacturing and installation of digital network equipment. Other versions, including a clock synthesizer, offer data generation and error detection at binary interfaces at rates up to 170 Mbit/s
The HP 3764A Digital Transmission Analyzer is used for analyzing the error performance of high speed digital transmission systems.
| 001 |
Provides Pattern generation; Error measurement & analysis at the four main CEPT rates of 2.048 Mbit/s, 8.448 Mbit/s, 34.368 Mbit/s & 139.264 Mbit/s. |
| 002 |
Provides Pattern generation; Error measurement & analysis: Jitter generation & measurement at 139.264 Mbit/s. |
| 003 |
Provides three additional Data Outputs which are delayed with respect to the main Data output. |
| 006 |
Provides Pattern generation; Error measurement & analysis at the five main CEPT rates of 704 kbit/s, 2.048 Mbit/s, 8.448 Mbit/s, 34.368 Mbit/s & 139.264 Mbit/s. The Frequency synthesizer also provides two variable frequency rates from 1 kbit/s to 170 Mbit/s and a selection of fixed and variable frequency Offsets for all available rates. |
| 007 |
Provides Pattern generation; Error measurement & analysis at 139.264 Mbit/s. The frequency synthesizer also provides two variable frequency rates from 1 kHz to 170 MHz and a selection of fixed and variable frequency Offsets. Jitter generation & measurement is provided at 139.264 MHz only. In addition a THRU Data capability is provided which allows Jitter to be added to, 139.264 Mbit/s CMI Coded Data or 139.264 MHz Binary clock. This Option ex~ludes the Tape Cartridge option (010), and the internal Printer. |
| 010 |
The internal printer is replaced by a Tape Cartridge Unit. This Option is not possible in conjunction with Option 007. |
| 907 | Front Handle Kit. |
| 908 | Rack Flange Kit. |
| 909 | Rack & Handle Kit. |
| 910 |
Provides a double set of Operating & Service manuals & an Extender card. |
| 915 | Provides a Service manual & an Extender card. |
点击看大图
